3FT T1 BOAT WHIP measuring a total length of 3'4"
- 21 Modes
- 12 Colors
- RF Wireless Remote
- LED Lighted Whip for Boat
FULL COLOR - Insanely bright LEDs make sure you're visible at all times and a clean straight design means you get a good amount of LEDs per foot of whip.
AMAZING PERFORMANCE - Water resistant, shockproof, virtually indestructible. These LED Whips are easy to install as you plug it in to most standard universal two prong base.
UNRIVALED VARIETY - 12 color combinations, 5 brightness levels, 10 flash patterns, and 21 chasing modes; That gives you 1,000 different options to choose from.
EASY INSTALLATION - plug into standard two prong base.
MAINTAINING CONTROL - Boating is all about maintaining control of your vehicle and equipment, yet this may not always be an easy task. Our LED whips, however, are easy to control and customize with a convenient wireless remote.
Handling the boat whip:
Hold stern base only when installing and removing light from watercraft. By installing or removing stern lights by the LED section, this can cause damage to the stern light that is not warranted. Please handle with care.
If your Boat Whip does not turn on:
If your whip has not started to dance with color when plugging it into the base, please ensure that you have proper connections from your power source to light base. You will also want to ensure that you have added the battery to the wireless remote and have pressed the on button. If you have checked these and your whip continues to not work, this is due to reverse polarity. What you will want to do is the following:
- Remove the whip from the boat base/adapter.
- Remove the set screw near the base of the whip and reinstall it on the opposite side (in the open threaded screw hole).
Plug your whip back into the boat base/adapter and enjoy!
The reason for this is due to the fact that our whips have controller/brains within them that give you all of the light options. Because of this, the positive and negative have to feed a dedicated side unlike the standard stern light that is not polarity sensitive.
Please do not hesitate to contact us with your questions and concerns.
U.S. Pat. 11,293,620
Recommended for the 3FT T1 LED STERN WHIP